Heart Coupled Rippled Sheet 132cm

Description

A wonderful contemporary water feature will be a great addition to a modern garden. Bubbling water illuminated with white LED's flows from the top of the fountain and cascades down the into the self contained pool below. This fountain can be installed both indoors and outdoors. This feature can be easily assembled just in 5 minutes without any tools.

Caring about your water feature...

Make sure that fountain fullfiled with water and the pump is well submerged. We strongly recommend  to refill the fountain with clean water regularly and, also, to add an algae prevention treatment to avoid the build-up of algae and keep the water clear. The algae treatment can be added to your shopping basket as an accessory. Always switch off the power before cleaning and maintaining the pump to avoid an electric shock. Never turn on the fountain pump to run without water. It is not recommended to leave the fountain turned on constantly. It is recommended to turn the fountain on/off when required.

Preparing your fountain for the Winter time...

Do not allow the ice to form in the bowls as it may crack the bowls. Pour out the water, wipe and clean all bowls and surfaces. Apply a Fountain Protection Cover (This can be added to your shopping basket) drain the fountain and store indoors in order of total protection and prolong the life of the paint finish. Disconnect the pump  from the main supply and remove it from the fountain. The pump should be cleaned by following the instructions added to each fountain.

Features

• Fully self contained - no need for a permanent water supply

• Hand made

• Made of durable polyresin

• White LED Lights

• Safe for children and pets
• Easy to unpack and install without any tools

• Pump & 10 metres of cable

• Adds a sense of peace and calm

• Low voltage 

The Box Contains

• Heart Couple Rippled Sheet Lit Water Feature

• Pump with 10 metres of cable

• Instructions

Dimensions

Height: 132cm / 52.8''

Width: 46.5cm / 18.6''

Depth: 25cm / 10''